U0295 GMC Auto Trouble Code
U0295 GMC OBD2 reports a sensor fault, replacement of the sensor is unlikely to resolve the underlying problem. The fault is most likely to be caused by the systems that the sensor is monitoring, but might even be caused by the wiring to the sensor itself.
Remove the air filter box assembly so you can access the transmission range switch. Turn the key to the ON position, but do not start the vehicle. Move the shifter to the neutral position. Align the alignment holes between the switch and the shift lever. Insert a 5mm drill bit into the adjustment hole to verify the proper alignment for the neutral position.
U0295 GMC Possible Solution:
Vehicle Speed Sensor (VSS) Out of Self Test Range Indicates the VSS input signal is out of Self Test range. If the PCM detects a VSS input signal any time during Self Test, a DTC P1501 will be set and the test will abort. Noisy VSS input signal from Radio Frequency Interference/ Electro-Magnetic Interference (RFI/EMI) external sources such as ignition wires, charging circuit or after market equipment. Check for VSS input to be 0 mph when vehicle transmission is in Park.
U0295 GMC Description For All Models :
- Gmc Acadia
- Gmc Autonomy
- Gmc Canyon
- Gmc Envoy
- Gmc Firebird
- Gmc Jimmy
- Gmc Safari
- Gmc Savana
- Gmc Sierra
- Gmc Sonoma
- Gmc Suburban
- Gmc Terra
- Gmc Terracross
- Gmc Terradyne
- Gmc Terrain
- Gmc Typhoon
- Gmc Yukon
|
U0295 GMC Trouble Repair :
With U0295 GMC code so start with the basics like a fuel pressure and fuel volume test. Or, you can start on the electrical side by doing a voltage drop on both the power and ground connections for the fuel pump. Some shops are reporting corrosion on the fuel pump ground that reduces power and fuel pressure. |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.